Mon – Fri: 7:00 am – 5:00 pm
Sat: 8:00 am – 12:00 pm
Looking for replacement double or triple glazed units in Maldon, Essex?
If your windows are misted, cloudy or “blown”, you often do not need full new frames. Showcase Plastics supplies replacement double glazed units (and triple where suitable) — cut to size for collection, delivery, or supply and fit across Essex.
We work from Unit 6, Heybridge Industrial Estate, The Causeway, Maldon CM9 4XL, for homeowners, landlords and trade.
Condensation between the panes, a foggy look, cracks or a failed seal usually means the sealed glass unit has failed — not necessarily the whole window.
In many cases the frame is still sound. We measure (or you supply sizes), specify a new unit, and replace the glass only. That is normally quicker and cheaper than replacing the entire window.
This is often called:
blown double glazing
misted double glazing
failed sealed units
cloudy window glass
A double or triple glazed window uses a sealed unit: two or more panes, a spacer bar, and a perimeter seal that keeps the cavity dry.
Seals fail over time because of:
Moisture then enters the cavity and shows as misting between the panes. Replacing the sealed unit is the usual fix.
Replacing replacement double glazed units (or suitable triple units) is typically:
The new unit is made to fit the existing frame so the window can perform like new again.
Upgrading the glass can give you:
Better thermal performance — modern energy-efficient double or triple glazing helps keep heat in.
Clear glass again — removes the cloudy, misted look.
Less noise — acoustic glass options where external noise is a problem.
Safety and privacy options — toughened, laminated or obscure glass where needed.
Lower running costs over time — better insulation than a failed old unit.
We aim to keep quoting straightforward — estimates within 24 hours where we have the right information.
When specifying replacement double glazed units, options can include:
We will advise what fits your frame and what is worth upgrading.
We supply sealed units for a wide range of systems, including:
Trade: units cut to size for installers.
DIY / homeowner: supply only or supply and fit, depending on the job and location.
If the frame is rotten, distorted or beyond repair, we will say so — unit-only replacement is not always the right answer.
These are classic signs of blown double glazing.
Showcase Plastics provides replacement double glazed units and glass replacement from Maldon and Heybridge, serving customers across Essex and the London borders — including Chelmsford, Colchester, Witham, Braintree, Burnham-on-Crouch, South Woodham Ferrers, Billericay, Basildon, Rayleigh, Southend, Romford and the wider CM, CO, SS, RM and IG postcodes.
Full list: Areas we cover
Browse related products: Glazing · Replacement glass
If you have misted, cloudy, blown or broken double or triple glazing, replacing the sealed unit is often the quickest, most cost-effective fix.
Call: 01621 842 000
WhatsApp: 07949 280 147
Email: sales@showcaseplastics.co.uk
Estimate: Get an estimate
Visit:
Showcase Plastics Ltd
Unit 6, Heybridge Industrial Estate
The Causeway, Maldon, Essex CM9 4XL
Hours: Mon–Fri 7:00am–5:00pm · Sat 8:00am–12:00pm
Yes. we offer replacement glass, for double and triple glazing in Maldon and beyond. See areas we cover to check you are within our service area, and if not, feel free to contact us to see if we can help or suggest anyone more local.
Yes. In most cases the sealed glass unit can be replaced without replacing the entire window frame.
Yes. In many cases, the sealed glass unit can be replaced without replacing the entire window frame. This is particularly useful where the existing frame is still in good condition.
Condensation between panes occurs when the seal of a double glazed unit fails, allowing moisture to enter.
A “blown” window usually refers to a failed sealed double or triple glazed unit. The perimeter seal has deteriorated, allowing moisture into the cavity between the panes and causing misting or condensation.
Not necessarily. If the frame is structurally sound and suitable for replacement glazing, the damaged glass unit may be replaced independently.
Replacing the sealed glass unit is usually far cheaper than installing a brand-new window.
Yes. Replacement sealed units can be supplied for many uPVC window systems, subject to the correct dimensions and specification.
Yes, replacement glazing can also be supplied for suitable aluminium window systems.
Potentially, yes. The existing frame and glazing system need to be assessed to determine the appropriate replacement unit.
In some circumstances, yes. Depending on the existing frame, available glazing space and required specification, you may be able to upgrade the glass to a higher-performance unit.
Yes. Acoustic glazing is available as an option where reducing external noise is a priority. The exact performance depends on the glass specification, window construction and installation.
Yes, where the application requires or is suitable for safety glazing. The correct glass specification should always be established for the individual installation.
Yes. Obscure and patterned glass can be used where privacy is required in bathrooms, front doors, side windows and other areas.
Yes, replacement triple glazed units can be considered where the existing frame and glazing system are suitable.
Yes, supply and fitting options are available depending on the location and requirements of the project.
The lifespan of a sealed unit varies depending on the glass, spacer, seal, manufacture, installation and environmental conditions. Properly manufactured and installed units can provide many years of service, but seals can eventually deteriorate over time. As a general rule – most double glazed units last 10–20 years before the seals may eventually fail.
Whichever you prefer. We can quote a price for the goods to be collected or delivered as supply only options, or supply and fit them for you for an all in one – no stress solution.
You can collect from our branch in Maldon or we can deliver, or delivery and fit. Whichever you prefer.
Simply contact us with details of what you need. Our team can discuss the application, measurements, glass specification and whether you require supply only or supply and fitting.