Mon – Fri: 7:00 am – 5:00 pm
Sat: 8:00 am – 12:00 pm
Mon – Fri: 7:00 am – 5:00 pm
Sat: 8:00 am – 12:00 pm
Ogee gutter is a moulded uPVC rainwater gutter with the classic S-curve face you see on Victorian and Edwardian houses — and on newer homes that want that period line instead of a plain half-round.
£1.00
Size on this listing: 120mm × 70mm
Guide roof area: 105m²
SKU: OGRG4 (4 metre lengths)
Colours: Black, White, Brown, Anthracite Grey
An ogee gutter sits on the fascia, shows a decorative front, and still moves a serious amount of water. The 70mm depth gives more capacity than a standard half-round, which is why ogee is often chosen for larger period roofs as well as for the look.
Keep fittings in the same ogee system and colour. Do not clip ogee lengths into half-round or deep-flow unions.
Also known as: OG gutter, ogee guttering, moulded gutter, period gutter, Victorian gutter, 4m ogee.
| Ogee gutter (this product) | Half round gutter 4m | Deep flow gutter 4m | |
|---|---|---|---|
| Look | Moulded S-curve / period | Simple curved channel | Deeper modern channel |
| Size here | 120 × 70mm | Standard half round | 114 × 71mm |
| Guide area | ~105m² | Smaller domestic | ~86m² (this site’s deep-flow figure) |
| Length | 4m | 4m | 4m |
| Best for | Period houses, feature eaves | Most standard replacements | Extra capacity, less “period” look |
| Attribute | Detail |
|---|---|
| Product | Ogee gutter |
| SKU | OGRG4 |
| Material | uPVC |
| Length | 4 metres |
| Width × depth | 120mm × 70mm |
| Guide drainage | 105m² |
| Profile | Ogee / OG (moulded S-curve) |
| Colours | Black · White · Brown · Anthracite Grey |
| Joints | Matching ogee unions with seals |
| Support | Ogee fascia brackets |
| Typical pipes | System-specific — often 68mm round or square pipe; confirm on order |
| Maintenance | Wipe / flush — no painting |
The profile is handed on some fittings (left/right stop ends on certain systems). Dry-lay corners before you cut a full ogee gutter run. Some modern ogee systems are symmetrical — we will tell you which fittings you have.
Tiles should overhang slightly into the channel so water drops in, not down the wall.
Fall
Aim about 1:350 (roughly 3mm per metre) towards the outlet.
Brackets
Typical maximum around 600mm–1000mm depending on the system and exposure — use closer centres in windy or snow-load positions, and always near joints, angles and outlets (about 150mm).
Expansion
Leave the marked gap at unions. Do not glue sealed clip joints.
Outlet
Plumb over the drain. Sit the ogee gutter close under the roof edge so the moulded face still reads cleanly from the ground.
One colour for gutter, brackets and pipe on each elevation.
01621 842 000 · WhatsApp 07949 280 147 · sales@showcaseplastics.co.uk
Mon–Fri 7am–5pm · Sat 8am–12pm
Maldon, Heybridge, Chelmsford, Colchester, Witham, Braintree, Burnham-on-Crouch, South Woodham Ferrers, Billericay, Basildon, Rayleigh, Southend, Romford and CM, CO, SS, RM, IG postcodes.
Follow the system instructions, or ask us to supply and fit.
| Colour | Typical match |
|---|---|
| Black | Most tiles; “cast iron” look |
| White | White fascia and windows |
| Brown | Older brown uPVC |
| Anthracite Grey | Grey frames and modern fascia |
Trade: 4m lengths, full ogee fittings range.
DIY: bring a photo of the existing gutter — if it is already ogee, replace like-for-like so corners and stop ends still fit.
Add this ogee gutter to an online estimate with fascia and downpipes. We aim to reply within 24 hours. Collect from Maldon or ask for delivery when the job starts.
What is an ogee gutter?
An ogee gutter is a uPVC eaves gutter with a moulded S-shaped front. This one is 120mm × 70mm, in 4m lengths, with a guide drainage area of 105m².
Is ogee the same as half round?
No. Half round is a simple curve. An ogee gutter has a stepped, period face and usually more depth.
Will it fit my old ogee fittings?
Only if it is the same system. Profiles vary — bring a fitting in or send a photo.
Which colour?
Match fascia and frames. Black is the usual “cast iron” look.
Do you fit as well as supply?
Yes.
Collection or delivery?
Both. Showcase Plastics, Unit 6, Heybridge Industrial Estate, Maldon CM9 4XL.
